Question: How Often To Change Motorcycle Chain?

How often should you replace chain on motorcycle?

The 2,000-Mile Rule To avoid this accelerated wear of your cassette and chainrings, a general rule of thumb is to replace your bike’s chain every 2,000 miles. Mind you, this is just a starting point. No two chains will wear at exactly the same rate because no two riders treat their chains the same.

How do you know when to replace your chain?

Another ballpark method for checking chain wear is by measuring it with a ruler. Pick a rivet and line it up at the zero mark. Count 24 more rivets and your last rivet should be at the 12″ mark of your ruler. If it is off by more than 1/16″ your chain is stretched to the point of replacement.

How long does a chain and sprocket last?

A chain can last anywhere from about 500 miles to 5000, depending on the quality of the chain, the sprockets, how the bike is ridden, and the maintenance. I clean my chain about twice a year, whether it needs it or not, and I get about 2000 miles out of mine.

How much does it cost to replace a motorcycle chain?

If you do need to replace both sprockets and the chain, what’s it going to cost you? It really depends on the motorcycle you’re working on. Chains can range in price from $20 for a plain chain for a small, lightweight motorcycle to over $200 for something like a quality O-ring chain for a bigger, more powerful bike.

Can I put wd40 on my motorcycle chain?

So, can I use WD-40 on my motorcycle chain? It is highly recommended that you do not use Multi-Purpose WD-40 on your motorcycle chain. The WD stands for Water Displacement, and it is designed to disperse water away from metal parts to prevent rust.

Why does my chain skip when I pedal hard?

Most of the time, a skipping chain is caused by cable stretch. In the first half dozen rides on a new bike your shift cables stretch the most. To fix a skip in the rear derailleur, shift your chain into the smallest ring on your rear cassette ( the hardest gear) and the middle or larger ring on your front derailleur.

How long should motorcycle chain last?

But chains wear out over time and need replacing. So, how often should a motorcycle chain be replaced? In general, a properly maintained motorcycle can will last 20,000 to 30,000 miles, sometimes more. But, some last as little as 5,000 to 10,000 miles.

When should I replace my SRAM 12 speed chain?

Typically chains get replaced when they reach a 0.5 wear measurement, 0.75 being slightly too long with the former 11 speed drivetrains. With the Eagle chains I can never get any chain tools to even drop in at 0.5 whatsoever, this being months and nearly1000 km later with elevation gains of around 15000-20000 Meters.

How do I know if my sprocket needs replacing?

Look closely at the sprocket teeth to see if they have become sharp at the tips and/or slightly curled. The teeth on a new sprocket are straight and have a flat or domed shape at the tip. If the teeth are sharp, the sprocket is worn.

What happens if motorcycle chain breaks?

If a motorcycle chain breaks while riding, you will immediately lose the driving force the engine applies to the rear wheel and your motorcycle will lose power.

How much does it cost to replace a chain and sprocket on a motorcycle?

$250 in labor to change chain and sprockets: motorcycles.

Do new motorcycle chains stretch?

A new motorcycle chain will appear to stretch during the first few rides after installation. However, a chain should not stretch too much immediately and might be defective if it continues to stretch or needs to be constantly adjusted.

Should you replace sprockets with chain?

It’s strongly recommended that you change your sprockets along with the chain. Putting a new chain on worn sprockets will only accelerate wear on both the chain and the sprockets.

What size motorcycle chain do I need?

What are the measurements of all of the different motorcycle chain sizes?

Chain	Pitch	Roller Diameter
428	12.70mm	8.51mm
520	15.88mm	10.16mm
525	15.88mm	10.16mm
530	15.88mm	10.16mm